Wall-Mount Enclosures

Compact enclosures for control and distribution

Wall-mount enclosures house control gear, small distribution boards and instrumentation where floor space is limited. NPE supplies steel and moulded enclosures with the gland plate and internal chassis arranged for the equipment.

Typical uses include motor-control boxes, small sub-boards, marshalling and metering, mounted at working height with a hinged or lift-off door.

24/7 Emergency Support

Electrical service you can count on

When wall-mount enclosure equipment fails, you need fast, reliable help from experienced engineers. We offer around-the-clock emergency support across Nairobi and East Africa — keeping your plant safe and powered, day or night. Whether it is an urgent breakdown or a scheduled repair, our team is ready to respond whenever you need us.

Cost and Estimates

What drives the cost

Space-saving

Mounted at working height, freeing floor area in plant rooms and back-of-house spaces.

IP54–IP66 options

Rating chosen for dust, washdown or sheltered outdoor exposure.

Internal chassis

Backplate or DIN-rail chassis arranged for the devices inside.

Sealed gland entry

Bottom or side gland plates keep the IP rating at the cable entry.

Engineering Calculator

Instant Technical Sizing

Enter parameters for real-time IEC/KPLC-standard sizing. Results update dynamically.

Connected load kW Voltage & Phase

Power Factor Spare Capacity (%)

Results

Design Current

—

Recommended Breaker

—

Recommended Type

—

Copper Cable Size

—

* For reference only. NPE engineering verifies configurations prior to build.

Frequently asked questions

What is the size limit?

Wall-mount suits smaller assemblies; above a certain weight and depth a floor-standing enclosure is safer and more maintainable.

Hinged or lift-off door?

Hinged for frequent access, lift-off where space in front is tight; both are available.

Can it be outdoor?

Yes with an IP65/66 rating and, where needed, an anti-condensation heater.

DIN rail or backplate?

DIN rail for modular devices, a backplate for contactors and larger gear; often both.

When in doubt, put safety first

If you are ever unsure or feel unsafe, do not take chances — call a licensed engineer. Safety always comes first. Contact us for verification, specification and installation support.

+254 0737-944-014

Speak to our experts