01
Field IO
Level, flow, pressure and motor status
PLC, SCADA & Automation Panels
Product detail
Product snapshot
PLC, SCADA & Automation Panels
PLC, SCADA and BMS panels that connect motor loads to usable plant data.
02
PLC panel
Logic, fail-safe states and alarms
03
Safety
E-stop, guard interlock and reset circuits
04
HMI/SCADA
Operator screens and trend visibility
I/O basis
Digital, analogue, remote I/O and gateway signal list
Operator layer
HMI, alarms, manual override and maintenance mode
Safety layer
E-stop loops, guard interlocks, safety relays and reset logic
Handover
IO schedule, alarm matrix, FAT/SAT and commissioning records
Read more
Automation and control panels that connect motor starters, drives, meters and field instruments into PLC, SCADA, BMS and remote-monitoring systems.
Nairobi Power Engineers designs and manufactures the assembly around site duty, prospective fault level, installation access, service continuity, cable entry and maintainability. The supply can be configured with ABB, Schneider Electric or CHINT equipment according to duty, lead time and lifecycle support.
Automation panels are documented with control philosophy, IO list, network protocol, fail-safe state, alarm matrix, marshalling schedule and commissioning handover sheets.
- PLC panels, marshalling panels and remote I/O cabinets for motor-control systems
- SCADA, BMS and telemetry interfaces for pumps, tanks, HVAC, process lines and campuses
- Run, trip, fault, speed, pressure, level, flow and energy signal integration
- Operator HMI, alarm beacons, status lamps, manual override and maintenance-mode controls
- Control philosophy, IO list, signal type and fail-safe state definition
- Network protocol, panel power supply, earthing and surge-protection planning
- Manual/auto mode, permissives, alarms, interlocks and maintenance override logic
- As-built wiring schedules, terminal numbering, FAT sheets and commissioning handover
OEM selection basis
ABB, Schneider Electric and CHINT fit where they genuinely belong.
- Schneider automation and PowerLogic ecosystem for BMS, SCADA and energy integration.
- ABB metering, control and drive interfaces for industrial plant monitoring.
- CHINT timers, relays, pilot devices and control components for practical automation panels.
- NPE logic, marshalling and field-loop documentation for maintainable Kenyan installations.
Technical detail library
Product Range & Target Markets, Switchboard Features and Options:
Automation rows only: PLC panels, remote I/O, marshalling, SCADA/BMS gateways, HMI stations and telemetry controls. Open the cards for ratings, source basis, build options and direct contact links.
Engineering Calculator
Instant Technical Sizing
Enter parameters for real-time IEC/KPLC-standard sizing. Results update dynamically.
Sizing results
Estimated FLA
-
Main Contactor
-
Overload Range
-
Suggested Frame
-
* For reference only. NPE engineering verifies configurations prior to build.
Frequently Asked Questions
What is included in PLC, SCADA & Automation Panels?
Our PLC, SCADA & Automation Panels solutions are custom-engineered and assembled locally at our Baricho Road workshop in Nairobi. A standard build includes high-quality modular enclosures, premium copper busbars (rated for local environmental conditions), type-tested circuit breakers or control elements from trusted global partners (ABB, Schneider Electric and CHINT), and comprehensive routine test certifications before delivery.
Which standards and ratings should be confirmed?
All assemblies comply with KEBS and EPRA regulations. You should confirm the required operational voltage (typically 415V three-phase or 240V single-phase in Kenya), rated current, prospective fault levels (e.g., 35kA or 50kA as per KPLC system requirements), form of separation (up to Form 4b), IP rating (IP31 indoor / IP54 for dust-heavy sites), and cable entry orientation (top or bottom entry).
How does NPE choose the product architecture?
NPE starts with the single-line diagram, load schedule and operating sequence, then selects the metering, monitoring and control path, device families, enclosure format, controls and testing requirements.
What information does NPE need to quote PLC, SCADA & Automation Panels?
Send the single-line diagram, load schedule, incoming supply details, fault level if known, preferred OEM brand, cable entry direction, installation environment and delivery location.
Can NPE supply ABB, Schneider Electric and CHINT options?
Yes. NPE can quote ABB, Schneider Electric, CHINT or a mixed-OEM architecture according to rating, availability, monitoring requirement, lifecycle support and budget.
Can the system include monitoring and remote signals?
Yes. Metering, alarms, Modbus, Ethernet, BMS contacts, SCADA points and commissioning checks can be included where the selected product family supports them.
Product enquiry
Do you have a PLC, SCADA & Automation Panels enquiry? Get in touch...
Use the calculators for a first-pass engineering check, then send us the SLD and load schedule for a project-ready selection.
Built and supported in Nairobi
Every automation panel NPE builds is engineered around the control philosophy and I/O schedule, assembled and point-tested at our Baricho Road workshop, and handed over with the documentation your systems integrator expects. Use the enquiry routes above for a sized quotation, or the form alongside to schedule an engineer.
24/7 Emergency Support
Electrical service you can count on
When PLC and SCADA automation equipment fails, you need fast, reliable help from experienced engineers. We offer around-the-clock emergency support across Nairobi and East Africa — keeping your plant safe and powered, day or night. Whether it is an urgent breakdown or a scheduled repair, our team is ready to respond whenever you need us.
Cost and Estimates
PLC and SCADA costs vary significantly depending on several key factors. Here is what you need to know to make informed decisions and avoid unexpected expenses.
What Affects the Cost?
The price of a PLC and SCADA package depends on the load schedule, fault level, enclosure form and IP rating, plus the OEM equipment you specify. Site conditions and delivery timelines also move the number.
Get a Detailed Estimate
Our engineers issue itemised quotations covering equipment, assembly, factory testing and delivery — no hidden fees. You know exactly what to expect before any work begins.
Smart Maintenance
Scheduled inspection, thermographic surveys and torque checks catch small issues early, helping you avoid major repairs. Planned maintenance extends system life and protects uptime.
Fast, Reliable Response
Whether it is a scheduled upgrade or an urgent call, our Nairobi workshop at Baricho Road responds quickly and gets the job done right — minimising downtime and keeping you safe.
When in doubt, put safety first
If you are ever unsure or feel unsafe around an energised assembly, do not take chances — call a licensed engineer. Safety always comes first. Feel free to contact us or give us a call.
+254 0737-944-014How to stay safe during an electrical emergency
Overheating or Burning Smell
Isolate the supply if it is safe to do so, keep people clear of the panel and call us immediately. A burning smell around an enclosure usually indicates a loose termination or an overloaded circuit and must never be left running.
Nuisance Tripping
Repeated tripping is a symptom, not the fault. It usually points to overload, an earth leakage path or a device sized incorrectly for the duty. We test the circuit, verify discrimination and correct the root cause rather than resetting the device.
Safe Isolation and Access
Only competent, authorised personnel should open a live assembly. Follow lock-off and permit-to-work procedures, and use the correct PPE and rated test equipment for the fault level of the installation.
Routine Inspection Intervals
We recommend periodic inspection and testing in line with the KS/IEC regime for your installation category, with thermographic scanning on critical boards. We can hold the schedule for you and report against it.