Conceptual switch disconnectors scene; exact specifications vary.
Switch disconnectors
Plan an appropriate isolation point for equipment and maintenance.
Confirm: AC or DC duty · pole arrangement · locking requirements.
Compare selection details ↗Solar & EV Charging Infrastructure
Rooftop solar, hybrid inverters and EV charging installed as one power strategy
Solar & EV Charging Infrastructure
Solar generation, battery hybrid inverters and EV charging all draw from or feed the same distribution board, so they are best planned together rather than bolted on one at a time.
We handle the electrical side end to end: AC combiner boards, export metering provision, surge protection, load management for chargers, and coordination with existing generator changeover.
What We Cover
- Solar AC combiner boards and grid-tie integration
- Hybrid inverter installation with backup circuits selected
- EV charger points with dynamic load management
- Metering arrangement for export, import and recharge billing
What You Receive
- Single line diagram of the combined power scheme
- Commissioning tests including anti-islanding checks
- Load management configuration for charging points
- Handover pack with monitoring access for owners
Information To Get Started
Roof or ground area available and shading overview
Daytime load profile and night-time base load
Number and type of vehicles to charge
KPLC account arrangement regarding export
Daytime KPLC bills that solar could displace
Tenants or customers asking for EV charging
Integrate generation and charging with the building’s electrical capacity.
Information to send
- Consumption profile and essential loads
- Roof or parking arrangement
- Incoming capacity and existing equipment
Scope to agree
- AC integration scheme
- Protection and isolation schedule
- Monitoring and load-management requirements
What changes the selection?
Equipment duty, installation conditions, available fault current, control interfaces and expansion plans all affect the specification. Agree the required drawings, tests and handover records before placing an order.
Request a scope review ↗Specify the whole working system.
Start with the equipment duty. Add the control, protection and measurement functions that your project needs; these are options to review, not a pre-approved assembly.
Conceptual fuse holders and fuses scene; exact specifications vary.
Fuse holders and fuses
Match the fuse system to the protected circuit and fault conditions.
Confirm: Fuse category · breaking capacity · replacement access.
Compare selection details ↗
Conceptual surge protection devices scene; exact specifications vary.
Surge protection devices
Coordinate surge protection with the earthing and supply arrangement.
Confirm: System voltage · SPD coordination · installation location.
Compare selection details ↗
Conceptual energy meters and power analyzers scene; exact specifications vary.
Energy meters and power analyzers
Measure demand and energy at useful points in the system.
Confirm: Measured circuits · accuracy needs · data integration.
Compare selection details ↗
Conceptual automatic transfer switch controllers scene; exact specifications vary.
Automatic transfer switch controllers
Coordinate source monitoring and the transfer sequence.
Confirm: Source arrangement · interlocking · return-to-mains logic.
Compare selection details ↗Discuss a Solar & EV Charging Infrastructure scope
Send the available BQ, load schedule, single-line diagram or site description and we will confirm the next step.
Images illustrate service and engineering contexts. View image credits.
Source parts for the work ahead.
Use the shop for identified components, or send a BOQ for review. Engineering service scope is agreed separately.
LOVATO manufacturer family images; exact configurations vary by model.
Send a BOQ or parts list